Concrete Sealers

SDI Stamp Seal is a VOC compliant (<400), clear sealing compound that will not yellow, available in a gloss or satin finish. It is packaged ready to use in one gallon jugs. SDI Stamp Seal is best applied to clean, new or old concrete with a short nap roller or airless sprayer at the rate of 200-300 ft per gallon. A second coat may need to be applied if desired. Sealing should not be done until all surface water has evaporated (preferably a minimum of 24 full hours after rinse, rain, or new placement). SDI Stamp Seal is our number "1" recommendation for exterior Decorative Concrete

SDI Stamp Seal AQUA SEAL is a non-yellowing, Water Based product designed for curing and sealing applications. AQUA SEAL is a penetrating and breathable coating that provides a low-medium gloss finish to a multitude of interior & exterior horizontal or vertical concrete and masonry finishes. AQUA SEAL is self-crosslinking, which provides better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance. Covers 250-400 ft per gallon.

EPO-SHIELD is a non-yellowing, Water Based Epoxy-Acrylic designed for interior concrete sealing applications. Available in Gloss or Satin, EPO-SHIELD is a coating that provides a superior finish to a multitude of interior horizontal or vertical concrete and masonry finishes. EPO-SHIELD is self-crosslinking, which provides better film formation, early water resistance, adhesion, toughness and outstanding efflorescence and alkali resistance. It can be applied to green concrete. EPO-SHIELD provides enhanced performance over traditional acrylics with better flexibility, chemical resistance, non-blushing, adhesion, durability and hot tire resistance. Covers 250-400 feet per gallon.